D to a fiber optic converter

Although fiber optic media converter comes into various types according to the parameters like data rate, interfaces, form factors, power options and Simple Network Management Protocol SNMP , the purposes to use fiber media converter in networks are usually simple. They are often used in pairs to extend a network over fiber by inserting a fiber segment into a copper network, or be used individually to accomplish the conversion between two different cable types. This post will introduce the connection guide of fiber media converters.

Before connecting fiber media converters, the interface of them should be firstly acknowledged. The following picture shows the most commonly used connectors that a fiber media converters may use.

The ST connector is designed for fiber optic cable using a bayonet locking system. SC connector and LC connector are the most popular small-form-factor fiber connectors. The RJ45 is the familiar to most people, which is designed for copper cable and can be found on most of our devices that need to be connected to the Ethernet.

To achieve this, businesses opt for blended networks comprising copper and fiber. This is one reason why there has been a surge in the demand for CCTV media converters.

A CCTV fiber media converter acts as an analog to fiber optic converter by converting the signals from a camera to light pulses. Video converters for CCTV cameras are devices which enable the conversion of analog signals from the camera to digital ones. So, even fiber optic CCTV video converters are compatible with analog cameras in a typical surveillance setup.

The installation kits include the video transmitter, receiver, power supplies, and meters of Multimode or Singlemode cable depending on the application. Our video to fiber converters are offered in 1, 2, 4, 8, or 16 channel options. Plug and Play design ensures adjustment-free installation and operation, and optical adjustments are never required. The fiber optic video converter transmitters and receivers provide 8-bit digitally encoded broadcast quality video over one fiber optic cable.

LED indicators are provided to instantly monitor the system operating status. A typical installation utilizes a transmitter unit at the camera end of the link, connected via a single fiber cable, to a receiver unit at the monitoring end of the link. A unmanaged media converter allows for simple communication with one another but does not provide monitoring, fault detection and setting up network configurations.

The unmanaged option is a great choice for newbies and if you want a plug and play fiber network cable installation. There are configurations you can set through a hardware DIP switch. Managed media converters cost more but offer advanced network monitoring, fault detection, remote configuration, and more functions. These types of features are used when managing your corporate firewalls, switches and routers. They are used in a controlled environment like offices. They cannot be installed easily inside equipment enclosures and normally have a single power supply input.

Are used in hot, humid, vibration-prone, electrically noisy environments. Industrial grade converters have rugged enclosures using Din-Rail or Panel Mounting so they can be easily installed inside equipment enclosures. They also have redundant power input. Unavailable Sold Out. PC card fiber media converters. Standalone fiber media converters.