How to program a digital tv converter box

Match the colors of the plugs to the colors of the ports, so that red plugs into red, white into white, and yellow into yellow. If your TV does not have a red port, leave that cable unplugged on both ends. To watch digital broadcasts, set your TV to "Video In. You will be able to access all available digital broadcasts through your converter box and its remote control.

Supplies: You will need your analog TV, the antenna you have been using indoor or outdoor , and the coaxial wire that currently connects your antenna to your TV as pictured on the right. Share Pin Tweet. Previous Post Answer : Where do you drain a washing machine?

Next Post Is stained wood trim outdated? Related Posts. DIY Crafts. Should a fridge compressor run all the time? Why does my faucet drip after I turn it off? Is it cheaper to buy a new TV or repair it? Will steel wool keep mice out? Press the volume keys on this remote control to check if they can adjust the volume of your TV set. When the LED for that button turns on and remains on, keep holding down that button. Connecting a remote to a TV requires a clear path so the TV can receive the signal the remote lets out during the programing process.

Universal remotes use 3-digit codes to sync to different TVs, but not all the codes listed will work. You must complete a process using different codes if the first try doesn't work. Admiral TV , , , , , , , Admiral VCR Advent TV , , , , Adventura TV Adventura VCR Aiko TV Aiko VCR Press the setup button if your remote does not have one, skip this part.

Hold the device button corresponding to the type of device you are using. Keep holding it and enter the code for the device that you found based on the brand. The LED will light up and stay on. Enter the code. Release the TV button.

Change the channel to see if it has worked. The button will light. With the button lit, point the remote at the TV and enter the TV's 3, 4, or 5 digit code. Press the TV button to store the 3, 4, or 5 digit code. Search the list for the brand of your remote to be taken to a page with your remote's code list. Once you have the list, enter the programming codes on your remote and try the remote out to make sure the code works.

Direct Code Entry Manually turn on the device you want to control. Find the Code List that came with the remote.

When you've finished entering the five-digit code, keep holding down the device key and look at the POWER key. Press on TV once or the desired device.