Wireless router setup netgear without cd

NOTE: Make sure that the modem is plugged into a power source. Step 2: Verify if your computer is getting an internet connection by accessing a website. Step 2: Plug in your modem and then your router to the power source. If you are using a wireless computer, you will need to connect it first with an ethernet cable.

Step 4: Observe the light of your router located at the upper panel of the device. Wait for a few minutes until the light turns solid blue.

If the light does not turn blue or blinking amber, the following is a list of troubleshooting tips that you can perform: Make sure that the router is properly connected to your modem with an ethernet cable. Powercycle the modem by unplugging it from the power source for a few seconds then plugging it back to the power source again. Powercycle the router by unplugging the router's power supply for 10 seconds then plug it back in. This will help the router to re-establish communication with the modem.

Step 1: Open a web browser and enter NOTE: If you are having issues in accessing The router will then establish and test the connection, and then it will check for firmware updates. Or, if you have previously installed the Belkin utility, uninstall it or right-click on the Belkin icon in the system tray and uncheck Automatic Firmware Update.

Step 3: Once the connection has been established, you will be prompted to modify your Network Name and Password. These can be found at the bottom of the router. If you choose to change your Network Name and Password, fill in the spaces provided for your entry. Step 4: The router will then verify your Network Name and Password. Once done, click. Step 5: Fill in the necessary information on the Register your router window and click Complete Registration.

Step 6: Click the Thanks, take me to the dashboard button. Was this support article useful? YES NO. Thank you for your feedback. Feedback Please tell us how we can make this article useful. If you are located in the United States, Section 17 applies to you: If you are located outside of the United States, or if Section 17 does not apply to you or is otherwise unenforceable as adjudicated by a court of competent jurisdiction, then Section 18 applies to you: All rights reserved.

Additional Support Questions? Search Again. Plug the router into a power source and press the power button. Log in with the default username "admin" and password "password. Click the "Wireless Settings" link from your router's dashboard to change settings.

To change the name of your network, type in a new value in the "SSID" field. Choose a security option from the list, such as WEP or WPA, to secure your network against intruders and require a password for access. Note : If your product is not supported or if you prefer to install your router using a computer, see the following knowledge base topic: How do I set up my NETGEAR router using the router web interface?

Advanced remote support tools are used to fix issues on any of your devices. The service includes support for the following:. Thank You Thank you for taking the time to respond. Rating Submitted Do you have a suggestion for improving this article? Can I change the router login username to something other than admin? How do I change my router admin password? For the old Smart Wizard router interface :.

How do I find or change my wireless network password? How do I upgrade my router firmware? Having the latest firmware will help increase the stability, functionality and performance of your product.

The new and most up-to-date firmware will likely correct issues and possibly add new and improved features to the product. How do I reset my router to factory default? Do I have to register my router for it to work?

No, you do not have to register your router for it to work. You do need to register your router in order to receive technical support, however.